Cables and springs are some of the most important components of a garage door system. Today, we’ll give you an overview of what they are, how they work, and why you shouldn’t attempt to repair either of them on your own unless you're absolutely qualified.
Torsion cables run along each side of your garage door. Composed of strong, flexible metal, cables must have just the right amount of tension, or your garage door may not open (if there’s not enough) or close (if there’s too much). Cables are raised and lowered with a pulley system and wound or unwound around a drum as the door opens and closes. The cable falling off the drum or winding incorrectly around the drum are both common problems for homeowners. If either of these things happen, your door can become jammed. Call a technician to reattach the cable or wind it correctly around the drum for you.
Cables are under extreme tension, and when they get old or rusty, they can weaken and snap. Never cut the cable to get your door to go down or attempt to repair a damaged cable on your own. Call a technician for immediate assistance, and don't attempt to operate your garage door under any of these conditions.
Torsion springs are wound tightly and contain an immense amount of stored energy when they aren’t being used. Typically situated horizontally above the garage door opening, they work with the cables and motor to open and close your garage door. The springs are what support the weight of your heavy door. When the door moves, the cables wind or unwind the springs, storing or releasing the energy required to raise or lower the door.
If a spring breaks (which it will, eventually), the pressure of lifting the garage door will be placed on the motor, forcing it to work very hard. This could result in serious damage to your garage door operator. That’s why it’s so important to fix a broken spring immediately; don’t operate your garage door if a spring is broken.
Most springs last an average of 5-7 years or 10,000 cycles. The more often you use your garage door, the more quickly they’ll wear out. If your torsion spring is broken, you might notice a gap in the coils. Do NOT attempt to replace the spring yourself. Don’t remove the old spring or get too close to a broken spring, either. Call a professional to handle the situation for you as soon as possible.
Wayne Dalton TorqueMaster Springs
When it’s time to replace your springs, consider TorqueMaster! The spring is housed in a steel tube instead of exposed, making it safer for consumers. When the spring breaks, it will be contained. Nevertheless, only trained professionals should replace or repair TorqueMaster springs, so if one breaks, call a technician. You can still seriously injure yourself working on this type of spring without the knowledge, experience, and specific tools necessary to do the job right.
Inspect your system; check for frayed cable, rust on the cable or the springs, and gaps in the springs. Call a garage door technician if you notice anything suspicious. WD Door provides garage door repair and installation service for Des Moines and much of Central Iowa. Call us today for immediate assistance, or fill out our onlineform to request a quote.